iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (IP-PBX Features)
To activate CLIR or COLR, before placing or answering a SIP call or an ISDN call
1. Press the {CLIR} or {COLR} Flex button.
Conditions
1. This feature may not be available in the specific SIP/ISDN service area or may be a
subscription service.
Programming
Related Features
Hardware
2.47 ANSWERING MACHINE EMULATION
Description
When a call is sent to a voice mail-box, the associated station can be assigned to notify the user
and allow the user to screen the call. Two methods of notification and call screening are:
• Ring mode – the user is notified by the Answering Machine Emulation (AME) Flex
button (if programmed), which will flash; the user may press the Flex button to
screen the caller as the voice message is stored.
• Speaker mode - when the call is sent to the Voice Mail-box, the caller’s voice is
automatically broadcast over the speaker of the user’s LIP Phone.
The user may terminate screening, and either leave the caller in voice mail to record a message,
talk with the caller and record the conversation in the mail-box, or answer the call and disconnect
the Voice Mail.
The user’s LIP Phone must be assigned with an AME Flex button for proper operation.
Operation
LIP Phone
To assign an {AME} button:
Ring Mode
1. Lift the handset, and press [PGM] + {FLEX} + ‘64’ + ‘0’ + [SAVE]
Speaker Mode
1. Lift the handset, and press [PGM] + {FLEX} + ‘64’ + ‘1’ + [SAVE]
To screen a call in the Ring mode:
1. Press the flashing {AME} button, the caller’s voice is broadcast over the station speaker and
simultaneously stored in the Voice Mail-box.
2-80