iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (IP-PBX Features)
1. Momentarily depress the hook-switch.
2. Place CO call to forward party.
3. Hang-up to complete the transfer.
Conditions
1. For this feature, at least one of the two CO lines (transferred or receiving) must provide
detection of disconnect supervision and lost loop condition.
2. If during transfer to an external party, the user presses the CO line of the original call, the
outgoing call is disconnected and the original call is connected to the user.
Programming
VOICE CONFIG
Station Data – Authorization Code & COS – Offnet FWD
System Data – Call Feature Timer – Transfer Recall Timer
Related Features
Hardware
Hold Recall
Call Transfer, Station
2.6.3 Call Transfer, Voice Mail
Description
CO calls can be directly transferred to a station’s VSF voice mail-box.
Operation
LIP Phone
While on a CO call, to perform a Call Transfer:
1. Press [TRANS].
2. Press [MSG/CALLBK] button.
3. Dial the number or press the {DSS/BLF} button for the desired station.
4. Hang-up to complete the transfer.
Conditions
1. The LED of a {LOOP} button will display the status of a call until the station no longer has call
supervision (ex., the call is successfully transferred).
Programming
VOICE CONFIG
Station Data – Preset Call Forward
System Data – Call Feature Timer – Transfer Recall Timer
2-14