iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (DATA Features)
4. Select the ‘Point-to-Point Tunneling Protocol Virtual Private Network (PPTP VPN)’ radio
button and click ‘Next’. The ‘Point-to-Point Tunneling Protocol Virtual Private Network
(PPTP VPN)’ screen appears.
Figure 6.143 PPTP VPN
5. Enter the username and password provided by the administrator of the network you are
trying to access.
6. Enter the remote tunnel endpoint address. This would be the IP address or domain name of
the remote network computer, which serves as the tunnel’s endpoint.
7. Click ‘Next’. The ‘Connection Summary’ screen appears.
Figure 6.144 Connection Summary
8. Select the ‘Edit the Newly Created Connection’ check box if you wish to be routed to the
new connection’s configuration screen after clicking ‘Finish’. This screen is described later
in this chapter.
9. Click ‘Finish’ to save the settings.
The new PPTP VPN connection is added to the network connections list, and is configurable like
any other connection.
231