iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (DATA Features)
Figure 6.264 Switch Ports Properties
You can see added VLAN ID from the table. The egress packets to ‘Port 1’ will be untagged.
Repeat to ‘Port 4’. And click of ‘Port 5’ and ‘New Entry’ to set tagging port. The following
screen appears.
Figure 6.265 VLAN settings per port
Edit ‘VLAN ID’ to 10 and select ‘Tagged’ from ‘Egress Policy’ drop-down menu. And click ‘OK’. You
are redirected back to the ‘Port 5 Settings’ screen after ‘Browser Reload’ screen
Figure 6.266 Switch port Settings
Click ‘OK’ to proceed. You are redirected back to the ‘LAN Ethernet Properties’ screen after
‘Browser Reload’ screen.
289