iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (IP-PBX Features)
SLT
To make a page:
1. Lift the handset.
2. Dial the desired paging code.
3. After the Page Warning Tone, make announcement.
4. Replace the handset, to return to idle.
To queue for a page when busy is received:
1. Dial 56 (Call Back code).
2. Replace the handset returning to idle.
Conditions
1. Stations dialing a Page Code will be queued when any of the other Paging zones are busy.
2. If an LIP Phone user attempts to page using the speakerphone, pre-selection will be
activated and display will show "LIFT THE HANDSET TO PAGE".
3. Stations receiving a page are considered idle for other incoming calls and ring will override
Page announcements over an LIP Phone speaker.
4. Stations in DND or busy will not receive Page announcements.
5. A station accessing a Paging Zone is considered busy.
6. Stations which are not included in a Paging Zone will not receive any page, including All Call.
7. A station is permitted only one Paging Zone queue request at a time; if a station attempts
another Paging Zone queue, only the last-received queue request is honored.
8. When a busy Paging Zone becomes idle, the system will select the oldest paging queue, and
signal the appropriate station; the signaled station will have an audible ring (distinctive ring)
indicating the queue callback.
9. The All Call Paging, while signaling the queued station, is considered busy; additionally, All
Call Paging is considered busy when any paging zone is active.
10. The queue recall is always in tone ring mode regardless of the station’s ICM signaling mode.
11. If the waiting station is idle, the Call Back ring signals the station for 15 sec., after which the
queue is canceled and the next station in the queue is signaled.
12. If the waiting station is busy, and the Paging zone becomes available, the next idle station in
the Paging Queue list is signaled and the busy waiting station is placed at the bottom of the
Paging Queue list. If there is no idle next station in the Paging Queue, the Paging Queue is
canceled.
13. When the waiting station goes to idle, and both a “Paging Queue” and “CO Call back Queue”
exist, the Paging Queue is given priority.
Programming
VOICE CONFIG
Station Data – Paging Access
System Data – Call Feature Timer – Paging Timeout Timer
Related Features
Hardware
Meet Me Page Answer
2-75