iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (DATA Features)
network name (SSID) is “iPECS SBG-1000 (XXXX)”, where XXXX are the last four
characters of the gateway’s MAC address (as printed on the sticker located at the bottom
of the gateway).
Figure 2.3 Available Wireless Connections
If you do not see your network, refresh the list of detected networks using the ‘Refresh
network list’ link.
2. Select the connection and click the ‘Connect’ button at the bottom of the screen. The
following window appears, requiring you to provide the WPA password (network key).
Figure 2.4 WPA Network Key Authentication
Enter the WPA password. This case sensitive password can be found on the sticker located
at the bottom of the gateway, and can be changed in the ‘Wireless’ menu item under the
‘Home’ tab. After the connection is established, its status changes to ‘Connected’.
Figure 2.5 Connected Wireless Network
7