iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (IP-PBX Features)
1. INTRODUCTION
1.1 OVERVIEW
Smart Business gateway (iPECS SBG-1000) is LG-Ericsson’s internet Protocol (iP) Enterprise
Communications Solution designed to meet the telecommunication needs of small-sized business.
Smart Business gateway uses advanced packet voice and IP switching technology, which is
combined with a rich feature content, to set a new standard in Voice over IP (VoIP) systems.
The system consists of basic one FXS port, eight 10/100 Base-T LAN Ethernet ports (including
four POE ports) and one Wan Ethernet port, one USB port. iPECS SBG-1000 is installed on the
desk and powered from an AC/DC adapter, which converts 100~240VAC to 48VDC. With optional
board, the system can have one/two FXO ports or one BRI port additionally and FXS can be
increased two ports.
iPECS SBG-1000 supports a variety of Phones; LIP Phones using iPECS Protocol, SIP Terminals
(WIT-400H, 88xx), and analog single-line devices. With the LIP Phones, commonly-used features
are activated with the touch of a single button. Additionally, most functions can be accessed from
any telephone by dialing specific codes.
Providing an environment rich in features, in addition to a fully featured voice intercom, the iPECS
SBG-1000 incorporates built-In Auto-Attendant (AA) and Voice Mail (VM), Remote Management
such as Web Based Admin.
By employing packet voice and IP switching, the iPECS SBG-1000 infrastructure can be employed
for, or can share the enterprise data network. Further, since all terminals have a unique IP address,
they can be moved anywhere with access to a network that can connect to iPECS SBG-1000 and
function without the need for “re-programming”. The use of the single common infrastructure and
ability to easily install or relocate telephones results in significant savings from the time of
installation and throughout the life of the system.
1-1