iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (IP-PBX Features)
ATTRIBUTE DESCRIPTION RANGE DEFAULT
VSF Announce 2 Repeat The 2nd announcement can be repeated to calls that 000~999
000
Timer
remain in queue at intervals of the VSF Announce 2
Repeat Timer. Note: VSF Announce 2 Repeat below
must be “ON”.
(seconds)
VSF Announce 2 Repeat After the 2nd announcement, if the call remains
ON
OFF
queued to the group, the 2nd VSF announcement can
be repeated at the VSF Announce 2 Repeat Timer
interval, defined above.
OFF
Overflow Destination A call to the group will continue to route through the
group until answered or all group members have been
tried. The call will remain at the last station or routes
to the assigned Overflow Destination. If VSF
Station or Group
Number, VSF
Announce,
System SPD
Announce is assigned, Auto Drop is available.
Overflow Timer
A call to a group will remain at the last station in the 000~600
180
group or route to the assigned Overflow Destination
after expiration of the Overflow Timer.
(seconds)
Warp-Up Timer
After terminating any call, a Hunt Group member will 002~999
002
be maintained in a busy state for the duration of the
Wrap-Up Timer.
(seconds)
Music Source
A Music source can be assigned so that calls to the
group will receive audio from the assigned source in
Ring-Back Tone
Record Play
Ring-Back
Tone
place of ring-back tone.
Maximum Queued Call When the number of calls queued to the group match 00-99 99
Counter
this parameter, new calls will receive an error tone
and be disconnected after the VSF AA announcement
is played (if assigned).
Allow Forward Member When a member is forwarded to another station, if this OFF : no FWD ON
option set OFF, the member receives a incoming hunt
call.
ON : FWD
Group Name An group name can be designated 12 character
VSF Wait Station
When an ring group call overflows or routes to the VM Station
group, a station number is used to identify the Mailbox
for the ring group messages.
Mail Box Password The password associated with an ring group Mailbox
is defined here. The password is used in conjunction
with the ring group as with a normal station.
12 digits
Forced Forward
Destination
Forced Forward Dest
Usage
Calls to a hunt group may forward calls directly to a
defined destination.
Calls to a hunt group may forward calls directly to a
defined destination. Forced Forward must be enabled
for the group.
STA or
Hunt grp.
VSF Annc
SysSpeed
OFF
ON
OFF
Table 3.2.4.2-3 PICK-UP GROUP ATTRIBUTES
ATTRIBUTE DESCRIPTION RANGE DEFAULT
Auto Pick Up
If a group member Station is ringing, another member ON
OFF
of the Group can Pick-Up the ringing call from their
station by simply going Off-hook.
OFF
All Ring
When a call is received to a member of the Pick-Up
Group in the Tone Ring mode, all members will ring.
Note: Auto Pickup must be set to ON.
ON
OFF
OFF
3-26