iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (DATA Features)
A preliminary step is to search for the gateway’s wireless network from the device itself. Refer to
the device’s documentation to learn how to perform this search. When iPECS SBG-1000 detects a
wireless request, the device is displayed under the relevant wireless connection.
Figure 2.9 Wireless Authentication – Pending
To allow this device to connect to your gateway, click ‘Allow’. The screen refreshes, updating the
status of the device.
Figure 2.10 Wireless Authentication – Authenticated
The device is now connected. Similarly, you can use the ‘Block’ link in order to log the device out
of your network.
2.1.3 Viewing the Local Network
The ‘Network Devices’ section also displays iPECS SBG-1000’s local network, which includes all
computers that have joined the gateway’s network, their IP addresses, and connection speed (see
Figure 2.1).
To view more information on a specific computer, click its respective link. The ‘Host Information’
screen appears.
9