iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (IP-PBX Features)
ATTRIBUTE DESCRIPTION RANGE DEFAULT
VSF Wait Station
When a call overflows or routes to the VM group, a Station Number
station number is used to identify the Mailbox for the
group messages.
Mail Box Password The password associated with a group Mailbox is Max 12 digits
defined here. The password is used in conjunction
with the group as with a normal station.
Forced Forward
Destination
Calls to a hunt group may forward calls directly to a
defined destination.
STA or
Hunt grp.
VSF Annc
SysSpeed
Forced Forward Dest Calls to a hunt group may forward calls directly to a
OFF
OFF
Usage
defined destination. Forced Forward must be enabled
for the group.
ON
Group Name An group name can be designated 12 character
Max Queued Call Counter When the number of calls queued to the group match
this parameter, new calls will receive error tone and
be disconnected after the VSF Announcement 1, if
assigned, is played.
00-99 99
Table 3.2.4.2-2 Ring Group Attributes
ATTRIBUTE DESCRIPTION RANGE DEFAULT
VSF Announce 1 Timer If all stations in the group are busy when a call is
000~999
015
received, the call may continue to wait (queue) for an
available station. If the queue period exceeds the VSF
Announce 1 Timer, the call is sent to a VSF
announcement. If the timer is set to 000, the call will
receive the first announcement, in full, prior to the hunt
process (guaranteed announcement).
(seconds)
Guar-Annc(Timer 0) Wait If When a call assigned to receive a guaranteed
OFF
ON
Busy
announcement arrives and all channels are busy, the
call may wait with Ringback until a channel is
available (ON) or bypass the announcement (OFF).
ON
VSF Announce 2 Timer After the 1st announcement, a 2nd announcement
000~999
000
Timer is activated. At expiration, if the call remains
queued to the group, the call is sent to the assigned
2nd VSF announcement.
(seconds)
VSF Announce 1 Location Each Ring Group can be assigned an announcement, 00~20 00: none
which is played if the call remains queued beyond the
VSF Announce 1 Timer duration. The announcement
location is a VSF Announcement number. An entry of
00 indicates no announcement.
VSF Announce 1 Auto If this attribute is selected, the call will drop after the Check box
Drop
1 st VSF announcement
VSF Announce 2 Location The Ring Group can be assigned a 2nd
00~-20 00: none
announcement, which is played if the call remains
queued beyond the VSF Announce 2 Timer duration.
The announcement location is a VSF Announcement
number. An entry of 00 indicates no announcement.
VSF announce Auto Drop If this attribute is selected, the call will drop after the
2 nd VSF announcement
Check box
3-25