iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (IP-PBX Features)
1. Press the [PGM] button.
2. Dial 0# (WHTU SUBSCRIBE code).
3. Press the [FLEX 1] button.
4. Dial the Station number to be used for DECT phone.
5. Dial the phone type. 3 is for GDC-34x/4xx and 4 is for LWS-WK.
6. Press the [SAVE] button.
7. Proceed to instruction below for GDC-450H or LWS-WK.
8. When the registration is completed below message is shown on LCD of attendant.
STATION : 14
SUBSCRIBED: SUCCESS
GDC-450H
To register GDC-450H to iPECS SBG-1000
1. Press the Menu button to display the menu.
2. From the menu use the Navigation button to highlight Phone Register.
3. Press the OK button; this displays the Phone Register menu.
4. Select “LWS Subscription” using the up and down arrows of the Navigation button and press
the OK button.
5. The GDC-450H searches for the iPECS/iPECS SBG-1000, displaying and “Searching..1”.
When a iPECS/iPECS SBG-1000 is found, its RFPI, is displayed. The RFPI of your
iPECS/iPECS SBG-1000 is available from your System Administrator, or perhaps the
attendant.
6. Press OK button while highlighting the RFPI to continue the registration to the system, or
Press No button to continue the search.
7. Press OK button; on successful registration, a confirmation tone is received at the GDC-
450H and the iPECS/iPECS SBG-1000.
8. If the registration fails, repeat procedure from Step 1 to 7 at the System Attendant and Step 1
to 8 from the GDC-450H.
LWS-WK
To register LWS-WK to iPECS SBG-1000
1. Press [MENU] button to display the menu.
2. Highlight “Phone Register” using the Navigation up/down key, and then press [OK] soft button
or Navigation ‘OK’ key.
3. Select “Subscription” using the Navigation up/down key, and then press [OK] soft button or
Navigation ‘OK’ key.
4. Display [Searching..1].
5. The system [RFPI : eg. 01234567890123] will be displayed when a system is found.
6. Press [OK] soft button or Navigation ‘OK’ key. In a few second, a confirmation tone is
received at the LWS-WK.
7. If the registration fails, repeat procedure from Step 1 to 7 at the System Attendant and Step 1
to 6 from the LWS-WK.
Conditions
1. Up to six (6) DECT phones can be registered and maximum 4 DECT calls can be placed
simultaneously.
2-112