iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (IP-PBX Features)
Attendants enable Periodic Reporting. Once enabled, the system continues to monitor and output
the requested report until the Periodic Report is disabled. On demand reports selected by the
Attendant. The Traffic Report is sent to the defined TCP port.
System resources covered by Traffic Reports are:
• Attendant Traffic Report
• Call Summary Report
• Hourly Call Report
• H/W Unit Usage Summary Report
• CO Summary Report
• Hourly CO Report
Summary Traffic Reports cover one of five Analysis periods selected at time of print:
• Today’s peak activity hour (within 24 hours)
• Yesterday’s peak activity hour (24 hours prior to Today’s activity)
• Last hour activity
• Today’s total activity
• Yesterday’s total activity.
Operation
Attendant
To print the All Summary Traffic Report periodically:
1. Press the [PGM] button.
2. Dial 0122 (All Summary report code).
3. Select hour for print (00-23).
4. Select minute for print (00-59).
5. Select Analysis Period (1-5).
6. Press the [SAVE] button.
To cancel the periodic All Summary Report:
1. Press the [PGM] button.
2. Dial 0123 (Cancel All Summary report code).
To print a traffic report:
1. Press the [PGM] button.
2. Dial 0121, or 0124-0129 (report code),
0121 All Summary Traffic Reports
0124 Attendant Traffic Report
0125 Call Summary Report
0126 Hourly Call Report
0127 Hardware Usage Summary Report
0128 CO Summary Report
0129 Hourly CO Report
3. Press the [SAVE] button.
Conditions
2-49