06.03.2015 Views

iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

<strong>iPECS</strong> <strong>SBG</strong>-<strong>1000</strong> <strong>User</strong> <strong>Manual</strong> (DATA Features)<br />

Figure 6.179 General Bridge Settings<br />

Schedule By default, the connection will always be active. However, you can configure<br />

scheduler rules in order to define time segments during which the connection may be active.<br />

Once a scheduler rule(s) is defined, the drop-down menu will allow you to choose between the<br />

available rules. To learn how to configure scheduler rules, refer to Section 6.9.3.<br />

Network Select whether the parameters you are configuring relate to a WAN, LAN or DMZ<br />

connection, by selecting the connection type from the drop-down menu. For more information,<br />

refer to Section 6.4.1. Note that when defining a network connection as DMZ, you must also:<br />

• Remove the connection from under a bridge, if that is the case.<br />

• Change the connection’s routing mode to “Route”, in the ‘Routing’ sub-tab.<br />

• Add a routing rule on your external gateway (which may be supplied your ISP), informing of<br />

the DMZ network behind <strong>iPECS</strong> <strong>SBG</strong>-<strong>1000</strong>.<br />

Physical Address The physical address of the network interface for your network. Some<br />

interfaces allow you to change this address.<br />

Clone My MAC Address Press this button to copy your PC’s current MAC address to the<br />

board.<br />

MTU MTU is the Maximum Transmission Unit. It specifies the largest packet size permitted for<br />

Internet transmission. In the default setting, Automatic, the gateway selects the best MTU for<br />

your Internet connection. Select ‘Automatic by DHCP’ to have the DHCP determine the MTU. In<br />

case you select ‘<strong>Manual</strong>’ it is recommended to enter a value in the 1200 to 1500 range.<br />

Internet Protocol Select one of the following Internet protocol options from the ‘Internet Protocol’<br />

drop-down menu:<br />

• No IP Address<br />

• Obtain an IP Address Automatically<br />

• Use the Following IP Address<br />

Note that the screen will refresh to display relevant configuration settings according to your choice.<br />

No IP Address Select ‘No IP Address’ if you require that your gateway have no IP address.<br />

This can be useful if you are working in an environment where you are not connected to other<br />

networks, such as the Internet.<br />

249

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!