06.03.2015 Views

iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

<strong>iPECS</strong> <strong>SBG</strong>-<strong>1000</strong> <strong>User</strong> <strong>Manual</strong> (DATA Features)<br />

Click ‘OK’ to proceed. You are redirected back to the ‘LAN Ethernet Properties’ screen after<br />

‘Browser Reload’ screen.<br />

Figure 6.249 Switch tab of LAN Ethernet Properties<br />

The ‘Port 7’ was set to VLAN 10. The ingress packets with VLAN ID 10 from ‘Port 5’ will be<br />

forwarded to VLAN ID 10 membership ports such as ‘Port 5’ and ‘Port CPU’. The egress packets<br />

will be transmitted with VLAN header VLAN ID 10 if the packets are included VLAN membership<br />

10. If the ingress packets with no VLAN header, they will be handled by VLAN 1.<br />

6.4.17.5.3 How to use VLAN on LAN Bridge<br />

If you would like to create VLAN interface on LAN Bridge with WAN like below figure, perform<br />

these following steps.<br />

Figure 6.250 Example of LAN Bridge VLAN<br />

283

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!