iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (IP-PBX Features)
To erase Wake-Up:
1. Press the [PGM] button.
2. Dial 22 (Erase Wake-up code).
3. Press [SAVE] button.
SLT
To stop the alarm notification:
1. Lift the handset.
Conditions
1. When receiving a wake up signal, lifting the handset will be heard Wake-up alarm prompt.
2. The Wake-up alarm Ring signal is 30 seconds, On/90 seconds, Off (3 times). If no action is
taken by the user, the ring signal is given to the Attendant with a display designating the
station number that did not respond.
3. Time (hh:mm) must be entered in the Military 24-hour format.
4. The daily alarm will reset and repeat each day until erased (cancelled)’ the One-time alarm
will reset and cancel automatically.
Programming
Related Features
Hardware
2.35 DIRECT STATION SELECT/BUSY LAMP FIELD (DSS/BLF)
Description
When a Flex button on an LIP Phone is assigned as a {DSS} button it also serves as a Busy Lamp
Field; the LED indicates the status of the associated station or system facility.
Operation
LIP Phone
Operation of this feature is automatic for assigned Flex buttons.
Conditions
1. A station receiving ICM ringing that is busy will show the DSS button LED on all other
stations flashing at 30 ipm.
2. A station receiving ICM ringing will receive visual indication with a flashing LED of the Flex
button associated with the calling station.
3. When a station receives a Camp-On, the LED of the DSS button associated with the calling
station will flash.
2-66