iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (DATA Features)
a. From the ‘Network Object Type’ drop-down menu, select ‘DHCP Option’. The screen
refreshes, changing to the following.
Figure 6.177 Edit Item – DHCP Options
b. From the designated drop-down menu, select one of the DHCP options. The field below
changes accordingly.
c. Enter a relevant value for the DHCP option (should be supplied by your service
provider).
10. Click ‘OK’ to save the settings.
6.4.14.3 Viewing and Editing the Connection’s Settings
To view and edit the WAN-LAN bridge connection settings, click the ‘Bridge’ link in the ‘Network
Connections’ screen. The ‘Bridge Properties’ screen appears.
Figure 6.178 Bridge Properties
6.4.14.3.1 General
This sub-tab enables you to view a detailed summary of the WAN-LAN bridge connection settings.
These settings can be edited in the rest of the screen’s sub-tabs, as described in the following
sections.
6.4.14.3.2 Settings
This sub-tab enables you to edit the following WAN-LAN bridge connection settings.
General This section displays the connection’s general parameters.
248