06.03.2015 Views

iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

<strong>iPECS</strong> <strong>SBG</strong>-<strong>1000</strong> <strong>User</strong> <strong>Manual</strong> (DATA Features)<br />

Figure 5.45 General<br />

WAN Devices Bandwidth (Rx/Tx) Before selecting the QoS profile that mostly suits your needs,<br />

select your bandwidth from this drop-down menu. If you do not see an appropriate entry, select<br />

‘<strong>User</strong> Defined’, and enter your Tx and Rx bandwidths manually.<br />

• Tx Bandwidth This parameter defines the gateway’s outbound transmission rate. Enter your<br />

Tx bandwidth in Kbits per second.<br />

• Rx Bandwidth This parameter defines the gateway’s Internet traffic reception rate. Enter<br />

your Rx bandwidth in Kbits per second.<br />

Note: By default, these parameters are set to 0 Kbps, which means that the bandwidth<br />

has not been limited on <strong>iPECS</strong> <strong>SBG</strong>-<strong>1000</strong>. Entering inaccurate Tx/Rx values will cause<br />

incorrect behavior of the QoS module. It is important to set these values as accurately as<br />

possible.<br />

If you wish to restore the default bandwidth settings, select ‘Unlimited’ from the drop-down menu,<br />

and click ‘Apply’. Note that you can also set the desired bandwidth on the WAN (or any other)<br />

device in the ‘Traffic Shaping’ screen (to learn how to do so, refer to Section 5.3.4.1).<br />

QoS Profiles Select the profile that mostly suits your bandwidth usage. Each profile entry<br />

displays a quote describing what the profile is best used for, and the QoS priority levels granted to<br />

68

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!