iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (IP-PBX Features)
4. For LIP Phone users, consecutive Intercom calls can be placed without the need to regain
ICM dial tone (no need to hang-up) between calls; the user simply presses another {DSS/BLF}
button.
5. An Intercom call to a station in the HF answerback or Voice Announce mode (H or P
Intercom Signaling Mode) is not considered answered unless the called user lifts the handset
or presses the [SPEAKER] button (goes off-hook).
Programming
VOICE CONFIG
System Data – Call Feature Timer - ICM Dial Tone Timer
System Data – Call Feature Timer – Inter Digit Timer
Related Features
Intercom Answer Mode
Speakerphone
Hardware
2.37 INTERCOM CALL HOLD
Description
While on an active ICM Call, LIP Phone users can place the ICM Call on hold; the held station will
receive the assigned Music-on-Hold. The call is placed on Exclusive Hold and recalls at the
holding station when the Exclusive Hold Recall timer expires.
Operation
LIP Phone
To assign a {ICM} Flex button:
1. [PGM] + {FLEX} + [PGM] + ‘53’ + [SAVE]
To place an active ICM call on hold:
1. Press the [HOLD] button; the ICM dial tone is received and the {ICM} button LED will flash at the
exclusive hold rate and the ICM dial tone is received.
To retrieve the held ICM call:
1. Press the {ICM} button or the {DSS/BLF} button associated with the held station; the {ICM} button
LED will be On and the ICM call connected.
Conditions
1. Only one ICM call may be placed on hold at a time.
Programming
2-68