iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (DATA Features)
3. Click ‘OK’ to delete the partition.
Figure 5.178 Lost Data Warning
5.5.4.2 Changing the System Storage Area Location
iPECS SBG-1000 uses a specific location on a storage device for storing data used by its various
services. The following services use the system storage area:
• Printer spool and drivers
• Users’ directories
If you would like to set a specific partition as the location for the system storage area, perform the
following:
1. Deselect the ‘Automatically Create System Storage Area’ check box. The screen refreshes
displaying the ‘System Storage Area’ field (containig the auto-selected partition).
Figure 5.179 Manually Defined System Storage Area
2. Enter the letter of the partition to which you would like to set the system storage area.
3. Click ‘OK’ to save the settings.
If you wish to view the system directories, verify that the system storage area is shared (refer to
Section 5.5.1.1). Then, browse to \ \ sbg-1000drive\ (use Windows
Explorer if you are using a browser other than Internet Explorer).
146