iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (IP-PBX Features)
Related Features
Hardware
Class of Service
Day/Night/Timed Ring Mode
2.73 SIP EXTENSION SERVICE
Description
The iPECS SBG-1000 system supports standard SIP phones; compatible SIP phones support the
IETF standard RFC3261 for real-time communications over the internet. Once registered, iPECS
SBG-1000 will deliver services to the SIP Phone.
Three steps should be followed for SIP phones to be registered to iPECS SBG-1000 and receive
services from the system: SIP phone Lock key installation, Station User Login configuration for SIP
phone, and SIP phone configuration.
Operation
Web Admin
To install the Lock key:
1. Enter Web Admin.
2. Select Voice Maintenance>Appliances Control>Lock Key Install.
3. Enter the proper Lock key in SIP Phone field.
4. Click [Save] button
To configure Station User Login for SIP phone:
1. Enter the Web Admin.
2. Select Voice Install>Station Registration>Station User Login.
3. Enter ID, Password and Desired Number.
4. Click [Save] button
WIT-400H
1. Press Menu + 8.Settings + 1.Profile Settings.
2. Edit System Default profile or add new profile about WLAN and network configuration.
3. Press Menu + 8.Settings + 2.SIP Setting.
4. Edit Phone Number, Display Name, Password, SIP Domain, Proxy IP and Proxy Port. The
Phone Number must be the desired station number and also the SIP Domain and the Proxy IP
should be the iPECS SBG-1000 LAN IP address.
5. Press Menu + 8.Settings + 3.Provisioning Setting.
6. Edit Address. The address should be the iPECS SBG-1000 LAN IP address.
7. Press Menu + 8.Settings + 1.Profile Settings.
8. Select the profile which you want to connect.
Please refer to the WIT-400H User Guide for the details.
2-108