iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (IP-PBX Features)
CO Line Registration – Net CO Line Attribute
CO Line Registration – Net Numbering Plan
Related Features
Hardware
2.80.1.2 Net Transfer
Description
A station user can transfer any kind of CO line to a station in other systems by pressing [TRANS]
button and dialing a transferred station such as a call transfer within the same system. There are
two kinds of transfer, screened and unscreened transfer.
There are two kinds of standard transfer method in H.450; Transfer by join and Transfer by
rerouting. The main difference is how control the connecting path between transferring and
transferred station. In case of Transfer by join, additional connecting path will be needed to transfer
the call to another station. In case of Transfer by rerouting, new connecting path is used to transfer
the call and old connecting path of transferring station will be cleared.
Operation
Screened transfer
1. Press the [TRANS] button at a station during conversation with a CO line. The CO line is
placed on Exclusive Hold.
2. Dial the station number of another system to transfer the call. The transferred station of
another system receives a ring signal.
3. Announce when the transferred station answers. Both stations can make a conversation
each other, but the held CO is still in waiting on Transfer hold.
4. Hang-up to complete the transfer.
Unscreened transfer
1. Press the [TRANS] button at a station during conversation with a CO line. The CO line is
placed on Exclusive Hold.
2. Dial the station number of another system to transfer the call.
3. Hang-up to complete the transfer.
Conditions
1. If both of transferred and transferred-to stations are located in the same system, the
networking path will be cleared. That is, the transfer call will be setup as intercom call.
2. The transfer will be canceled when user presses the flashing [CO] or [TRANS] button.
3. Net Transfer call does not recall to the origination.
4. User hears an error tone if there is no idle networking path.
5. Net transfer is not activated to a busy station.
2-118