iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (IP-PBX Features)
4. Dial desired option code.
5. At completion of session, hang-up to return to idle.
To attach a memo to the current voice message:
1. During or after the New or Old Message option prompt, dial ‘7’.
2. At the beep, record the memo.
3. Dial ‘*’ to stop recording and store the memo.
4. During or after the New/Old option prompt, dial 4 to forward the message and memo.
SLT
To retrieve Voice Mail locally:
1. Lift the handset.
2. Dial the Voice Mail Group to receive the “Mail Box & Password” prompts sequentially.
3. Dial the Mail Box and corresponding password to receive the “Number of Messages” prompt.
4. Dial desired option code.
5. At completion of session, hang-up to return to idle.
To attach a memo to the current voice message:
1. During or after the New or Old Message option prompt, dial ‘7’.
2. At the beep, record the memo.
3. Dial * to stop and store the memo.
4. During or after the New Old option prompt, dial ‘4’ to forward the message and memo.
Conditions
1. If no new/old messages are available, pressing ‘1’ or ‘2’, is an invalid operation and the user
receives the “Invalid Entry” prompt or “No Message” prompt.
2. If the dialed number is not recognized, the "Invalid Entry" prompt is played. After the second
invalid entry, the user is disconnected.
3. The user may dial digits at any time during a voice mail playback, system prompt or silence;
the user must dial a digit in response to a system prompt within the CCR Analysis timer or
the system will disconnect and return error tone.
4. Messages are retrieved in LIFO (Last in First out) order.
Programming
Related Features
Hardware
Message Retrieval Options
Remote Message Retrieval
VSF
2-59