iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (DATA Features)
Figure 6.83 Network Connections
You can edit the new virtual access point’s properties by clicking its action icon. The ‘LAN
Wireless 802.11n Access Point - Virtual AP Properties’ screen appears. For example, change the
connection’s default name by changing the SSID value in the ‘Wireless’ sub-tab.
Figure 6.84 LAN Wireless 802.11n Access Point – Virtual AP Properties
A usage example for this virtual connection is to dedicate it for guest access. Through this
connection, guests will be able to access the WAN, but they will be denied access to other wireless
LANs provided by iPECS SBG-1000. To do so, perform the following:
1. Set a firewall rule that blocks access to all other iPECS SBG-1000 LANs.
To learn how to do so, refer to Section 5.2.8.
Figure 6.85 Firewall Rule
2. Back in the virtual connection’s ‘LAN Wireless 802.11n Access Point - Virtual AP
Properties’ screen:
a. In the ‘Internet Protocol’ section under the ‘Settings’ sub-tab, enter an IP address for
the connection by selecting ‘Use the Following IP Address’.
200