iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (DATA Features)
Figure 5.131 Point-to-Point Tunneling Protocol Server (PPTP Server)
This screen enables you to configure:
Enabled Select or deselect this check box to enable or disable this feature.
Note that checking this box creates a PPTP server (if not yet created with the wizard), but does not
define remote users.
Click Here to Create VPN Users Click this link to define remote users that will be granted access
to your home network. Refer to Section 6.3 to learn how to define and configure users.
Remote Address Range Use the ‘Start IP Address’ and ‘End IP Address’ fields to specify the
range of IP addresses that will be granted by the PPTP server to the PPTP client.
5.4.2.2 Advanced PPTP Server Settings
To configure advanced PPTP server settings press the ‘Advanced’ button on the PPTP screen
(see Figure 5.131). The screen expands, offering additional settings:
Figure 5.132 Advanced PPTP Server Parameters
120