iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (DATA Features)
Figure 6.74 802.1x WEP Wireless Security Parameters
• Non-802.1x WEP Non-802.1x WEP is a data encryption method utilizing a statically defined key
for wireless clients that do not use 802.1x for authentication, but use WEP for encryption. You
may define up to four keys but use only one at a time. Note that the static key must be defined
in the wireless Windows client as well.
Inter Client Privacy Select the check box to prevent communication between the wireless
network clients using the same access point. Clients will not be able to view and access each
other’s shared directories.
Active Select the encryption key to be activated.
Encryption Key Type the encryption key until the entire field is filled. The key cannot be
shorter than the field’s length.
Entry Method Select the character type for the key: ASCII or HEX.
Key Length Select the key length in bits: 40 or 104 bits.
Figure 6.75 Non-802.1x WEP Wireless Security Parameters
The encryption key must be defined in the wireless Windows client as well. This is done in the
Connection Properties Configuration window (to learn how to reach this window, refer to
Section 6.4.5.3.2).
196