iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (IP-PBX Features)
Programming
VOICE CONFIG
System Data – Call Feature Timer – MSG Wait Reminder Tone Timer
Related Features
Message Wait/Call Back
Hardware
LIP Phone
2.42 PAGING
2.42.1 Paging & All Call Paging
Description
A station can connect and transmit voice announcements to any or all of the system Paging zones.
Stations are grouped into “zones” to receive pages to the zone. Stations not assigned to any zone
will not receive a page including All Call pages.
A page warning tone will be provided to the Paging Zone(s) prior to the audio connection. The user
is allowed to continue the page for the specified Page Time-out timer after which the user is
disconnected and the Paging Zone(s) is returned to idle.
The default Paging Zone dial access codes are as follows:
Paging Zones 501~510
All Call Page 500
Flexible buttons of an LIP Phone may be assigned to access a Paging Zone as a {PAGING ZONE}
button.
Operation
LIP Phone
To assign a Flex button as a {paging zone} button:
1. Lift the handset, and press [PGM] + {FLEX} + Paging Zone number + [SAVE]
To make a page:
1. Lift the handset.
2. Dial the desired paging code or press a {PAGING ZONE} button.
4. After the Page Warning Tone, make announcement.
5. Replace the handset to return to idle.
To queue for a page when busy is received:
1. Press the [MSG/CALLBK] button.
2. Replace the handset to return to idle.
2-74