iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (DATA Features)
Routing Table Allows you to add or modify routes when this device is active. Use the ‘New
Route’ button to add a route or edit existing routes.
To learn more about routing, refer to Section 6.6.
6.4.8.3.4 L2TP
This sub-tab enables you to edit the following L2TP settings.
L2TP Define your ISP’s server parameters.
• L2TP Server Host Name or IP Address Enter the connection’s host name or IP address
obtained from your ISP.
• Shared Secret Enter the shared secret value obtained from your ISP.
Figure 6.133 L2TP Configuration
6.4.8.3.5 Advanced
This sub-tab enables you to edit the advanced L2TP settings.
Internet Connection Firewall Your gateway’s firewall helps protect your computer by preventing
unauthorized users from gaining access to it through a network such as the Internet. The firewall
can be activated per network connection. To enable the firewall on this network connection, select
the ‘Enabled’ check box. To learn more about your gateway’s security features, refer to
Section 5.2.
Figure 6.134 Internet Connection Firewall
225