iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (DATA Features)
Figure 6.187 Internet Connection Firewall
• Additional IP Addresses You can add alias names (additional IP addresses) to the
gateway by clicking the ‘New IP Address’ link. This enables you to access the gateway using
these aliases in addition to the 192.168.1.1 and the http://sbg-1000.home.
Figure 6.188 Additional IP Addresses
6.4.15 Setting Up an IPIP Tunnel
iPECS SBG-1000 allows you to create an Internet Protocol over Internet Protocol (IPIP) tunnel to
another router, by encapsulating IP packets in IP. This tunnel can be managed as any other
network connection. Supported by many routers, this protocol enables using multiple network
schemes. Note, however, that IPIP tunnels are not secured.
6.4.15.1 Creating an IPIP Tunnel
To create a new IPIP tunnel, perform the following:
1. In the ‘Network Connections’ screen under ‘System’ (see Figure 6.11), click the ‘New
Connection’ link. The ‘Connection Wizard’ screen appears (see Figure 6.12).
2. Select the ‘Advanced Connection’ radio button and click ‘Next’. The ‘Advanced Connection’
screen appears.
253