iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (IP-PBX Features)
2.61 STATION FLEXIBLE BUTTONS
Description
The LIP Phone incorporates a field of “Flex” buttons as well as the fixed feature buttons. The Flex
buttons are assigned in the system database to access features, functions or resources of the
system. Specifically, Flex buttons can be assigned as:
• Empty button – has no system database assignment.
• {DSS/BLF} button – used to place One-touch ICM calls to a designated station and display
Station status.
• Flex Numbering Plan button – activates the feature associated with the assigned digits from
the Flexible Numbering Plan.
• Speed Dial bin button – accesses and dials the number from the assigned Speed Dial bin.
• Loop button – provides an appearance for incoming CO calls when a direct CO appearance
is not available; the Loop button LED provides the status for the duration of the call (must
be programmed using Web. Admin.).
• Station User Program Code button – accesses or activates the special features available
with Station User Program Codes (refer to Section 3.67).
• CO Line Appearance button – provides access to the individual CO Line assigned to the
Flex button. The CO Line button LED provides the status of the CO Line. This button is only
available in an attendant station.
With the exception of CO Line buttons and Loop button, Flex buttons can be assigned at the
station by the end-user.
Operation
LIP Phone
To assign a Flex button at the station:
1. Press the [PGM] button.
2. Press the desired Flex button.
3. Dial the digits from the Flexible Numbering Plan.
4. Press the [SAVE] button.
OR
1. Press the [PGM] button.
2. Press the desired Flex button.
3. Press the [PGM] button.
4. Dial the digits from the Station User Program Code (refer to Section 3.67) or Fixed Number
Plan.
5. Press the [SAVE] button.
Conditions
1. The {LOOP} buttons provide a status indication for the call as long as the station has
supervisory control.
2-93