iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (DATA Features)
preventing unauthorized users from gaining access to it through a network such as the Internet.
The firewall can be activated per network connection. To enable the firewall on this network
connection, select the ‘Enabled’ check box. To learn more about your gateway’s security features,
refer to Section 5.2.
Figure 6.216 Internet Connection Firewall
Additional IP Addresses You can add alias names (additional IP addresses) to the gateway by
clicking the ‘New IP Address’ link. This enables you to access the gateway using these aliases in
addition to the 192.168.1.1 and the http://sbg-1000.home.
Figure 6.217 Additional IP Addresses
6.4.17.3.4 DSCP Remark According to 802.1p CoS
When creating a VLAN interface over a LAN connection, it is possible to determine the IP
header’s Differentiated Services Code Point (DSCP) priority value according to the VLAN
header’s 802.1p Class of Service (CoS) tag. The DSCP value can then be used for Quality of
Service (Qos) traffic prioritization. For more information, refer to Section 5.3.
Figure 6.218 DSCP Remark According to 802.1p CoS
Select the ‘Enabled’ check-box. The screen refreshes, displaying the following table.
Figure 6.219 DSCP Remarks Table
Click the ‘New DSCP Remark’ link. The following screen appears.
270