iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (DATA Features)
Figure 5.17 Port Triggering
2. Select the ‘User Defined’ option to add an entry. The ‘Edit Port Triggering Rule’ screen
appears.
Figure 5.18 Edit Port Triggering Rule
3. Enter a name for the service (e.g. “game_server”), and click the ‘New Trigger Ports’ link.
The ‘Edit Service Server Ports’ screen appears.
Figure 5.19 Edit Service Server Ports
4. From the ‘Protocol’ drop-down menu, select ‘UDP’. The screen will refresh, providing
source and destination port options (see Figure 5.20).
5. Leave the ‘Source Ports’ drop-down menu at its default “Any”. From the ‘Destination Ports’
drop-down menu, select “Single”. The screen will refresh again, providing an additional field
in which you should enter “2222” as the destination port.
6. Click ‘OK’ to save the settings.
Figure 5.20 Edit Service Server Ports
46