iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (DATA Features)
Figure 6.222 Switch Ports Properties
You can see switch ports information such as status, PVID and VLANs with egress policy([U] is
egress untagged and [T] is egress tagged sign.) Click the action icon that corresponds to
the port you would like to configure. The ‘Port Settings’ screen appears.
Figure 6.223 Switch port Settings
Enter an ID of the VLAN used for default VLAN. The incoming (ingress) untagged frames will be
forwarded according to this ID. And the incoming tagged frames with this ID will be forwarded. If
you would like to add more VLAN IDs to this port, click ‘New Entry’ link. The ‘Add Port to a
VLAN’ screen appears.
Figure 6.223 VLAN settings per port
Enter an ID you want. And from the ‘Egress Policy’ drop-down menu, select the ‘Untagged’ or
‘Tagged’. The ‘Untagged’ is action that VLAN header will be removed from egress packets if the
packets have VLAN header. On the contrary, the ‘Tagged’ is action that VLAN header will be
272