iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (IP-PBX Features)
To retrieve a parked call:
1. Lift the handset or press the [SPEAKER] button,
2. Dial the Call Park/Park Orbit code (601-610).
SLT
To park an active external call:
1. Momentarily press the hook-switch.
2. Dial the Call Park/Park Orbit code (601-610).
3. Return to idle.
To retrieve a parked call:
1. Lift the handset.
2. Dial the Call Park/Park Orbit code (601-610).
Conditions
1. If the selected Call Park/Park Orbit returns a busy signal, the user may dial another Call
Park/Park Orbit without the need to disconnect.
2. Intercom calls cannot be placed in a Call Park/Park Orbit location.
3. A Parked call will recall to the station that parked the call should the Call Park Timer expire;
the normal Hold Recall process is then initiated.
4. A Parked call will indicate busy at all appearances.
Programming
VOICE CONFIG
System Data – Call Feature Timer – Call Park Recall Timer
Related Features
Hardware
Hold Recall
Attendant Recall
2.5 CALL PICK-UP
2.5.1 Directed Call Pick-Up
Description
A station may answer incoming and transferred intercom, CO and IP calls ringing at another
station (Call Pick-Up). All ringing calls are subject to Directed Call Pick-up except Queue Callbacks.
LIP phone users may assign a Flex button as a {DIRECTED CALL PICK-UP} button.
2-8