06.03.2015 Views

iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

<strong>iPECS</strong> <strong>SBG</strong>-<strong>1000</strong> <strong>User</strong> <strong>Manual</strong> (DATA Features)<br />

Figure 6.220 DSCP Remark Entry Settings<br />

Enter the 802.1p CoS and DSCP values to be associated, and click ‘OK’. The new pair of<br />

values will appear in the table.<br />

Click ‘OK’ to save the settings.<br />

6.4.17.4 Switch configuration<br />

As described in Section 6.4.17.1, switch device is connected with ‘LAN Ethernet’ device.<br />

Therefore, you must properly set up switch configuration according to ‘LAN Ethernet’ settings.<br />

First of all, you should find ‘LAN Ethernet’ page for switch settings. You can find the page in<br />

‘Network Connections’ of ‘System’. Click ‘System’ on top of menu and ‘Network Connections’.<br />

The following screen appears.<br />

Figure 6.221 Network Connections list<br />

Click the ‘LAN Ethernet’ link and select ‘Switch’. The following screen appears.<br />

271

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!