iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (IP-PBX Features)
user receives normal Intercom dial tone for the Prime Line Delay timer and after the delay, the
Prime Line is accessed.
Operation
LIP Phone
To access the station’s Prime Line
1. Lift the handset or press [SPEAKER] button and take no action, Prime Line as assigned will be
accessed.
Conditions
1. Any of the station’s Flex buttons may be assigned as the Prime Line. When the user lifts the
handset or presses the [SPEAKER] button, the system will act as if the user had pre-selected
the button prior to going off-hook.
2. Selection of another Flex button or Feature button just prior to an off-hook event will override
the Prime Line assignment.
3. When Delayed Prime Line is set, the user must wait, taking no action until the Prime Line is
accessed. The user receives ICM dial tone during this period and may dial any valid
numbering plan digit(s) or select a Flex button or feature button.
4. If the Prime Line Delay Timer is greater than Dial tone timer, the Delayed Prime Line will not
activate. It will be necessary to reduce the delay timer or extend the Dial tone timer.
Programming
VOICE CONFIG
Station Data – Common Attributes – Prime Line
Station Data – Common Attributes – Idle Line Selection
System Data – Call Feature Timer – Prime Line Delay Timer
Related Features
Speakerphone
Intercom Call (ICM Call)
Station Flexible Buttons
Hardware
LIP Phone
2.75 INTERNATIONAL CALL RESTRICTION
Description
Outgoing international call is normally very expensive. International call can be restricted by
program.
2-110