iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (DATA Features)
network you are trying to access.
6. Click ‘Next’. The ‘Connection Summary’ screen appears.
Figure 6.163 Connection Summary
7. Select the ‘Edit the Newly Created Connection’ check box if you wish to be routed to the
new connection’s configuration screen after clicking ‘Finish’. This screen is described later
in this chapter.
8. Click ‘Finish’ to save the settings.
The new IPSec Server will be added to the network connections list, and will be configurable like
any other connection. To learn more about the configuration of an IPSec server, refer to
Section 5.4.1.
6.4.14 Setting up a WAN-LAN Bridge
A WAN-LAN bridge is a bridge over WAN and LAN devices. This way computers on the iPECS
SBG-1000 LAN side can get IP addresses that are known on the WAN side.
6.4.14.1 Creating a WAN-LAN Bridge Connection
To create a new bridge or configure an existing one, perform the following:
1. In the ‘Network Connections’ screen under ‘System’ (see Figure 6.11), click the ‘New
Connection’ link. The ‘Connection Wizard’ screen appears (see Figure 6.12).
2. Select the ‘Advanced Connection’ radio button and click ‘Next’. The ‘Advanced Connection’
screen appears.
241