06.03.2015 Views

iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

<strong>iPECS</strong> <strong>SBG</strong>-<strong>1000</strong> <strong>User</strong> <strong>Manual</strong> (DATA Features)<br />

Figure 6.28 Network Bridging – Add a New Bridge<br />

5. Click ‘Next’. The ‘Connection Summary’ screen appears, corresponding to your changes.<br />

Figure 6.29 Connection Summary – Configure Existing Bridge<br />

6. Select the ‘Edit the Newly Created Connection’ check box if you wish to be routed to the<br />

new connection’s configuration screen after clicking ‘Finish’. This screen is described later<br />

in this chapter.<br />

7. Click ‘Finish’ to save the settings. The new bridge will be added to the network connections<br />

list, and it will be configurable like any other bridge.<br />

The new bridge will be added to the network connections list, and it will be configurable like any<br />

other bridge.<br />

Note: Creating a WAN-LAN bridge disables <strong>iPECS</strong> <strong>SBG</strong>-<strong>1000</strong>’s DHCP server. This<br />

means that LAN hosts may only receive an IP address from a DHCP server on the WAN.<br />

If you configure a host with a static IP address from an alias subnet of the bridge<br />

(192.168.1.X), you will be able to access <strong>iPECS</strong> <strong>SBG</strong>-<strong>1000</strong> but not the WAN, as NAT is<br />

not performed in the WAN-LAN bridge mode.<br />

173

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!