06.03.2015 Views

iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

<strong>iPECS</strong> <strong>SBG</strong>-<strong>1000</strong> <strong>User</strong> <strong>Manual</strong> (IP-PBX Features)<br />

3.1.2 Station Registration<br />

3.1.2.1 Station List & Replacement<br />

Registered station list is displayed on this page; a user can see IP address, device type, version of<br />

device, connect status of registered devices. In addition, a user can change the logical number of<br />

station, station name, remark and so on.<br />

3.1.2.2 Registration Table<br />

By entering device MAC addresses, the system will allow the device to register.<br />

While initial installation, you may want to register all connected stations without MAC address<br />

programming. Then you should select “All Stations” in front of Save button on the “Registration<br />

Table” web page and click Save button. After all connected stations are registered, you should<br />

select back to “MAC matched Station Only” to prevent unintended device registration. While “All<br />

Stations” can be registered, 4 th LED – IP-PBX LED will be flashing more rapidly as warning sign.<br />

3.1.2.3 Station <strong>User</strong> Login<br />

Station <strong>User</strong> Login is primarily intended for Phontage and SIP extension registration. A station<br />

must register with the system each time it is connected to the system. A user may register the<br />

Phone employing a Login code (<strong>User</strong> ID) and password. Once registered, the station number is<br />

assigned. Once registered, this <strong>User</strong> ID must match the password for future registrations. The ID<br />

and password can be pre-assigned along with desired station number and a remark. A link-paired<br />

station can be assigned or pre-assigned by assign the same Desired-Number as a Master station.<br />

Table 3.1.2.3 Station <strong>User</strong> Login<br />

ATTRIBUTE DESCRIPTION RANGE DEFAULT<br />

Registered Number Station number registered to the station, displayed only Station number<br />

after registration<br />

Linked<br />

Indicates Linked pair status and station number,<br />

M or S<br />

displayed only<br />

ID <strong>User</strong> Login ID. 12 Characters<br />

Password <strong>User</strong> Login password 12 digits<br />

Desired Number Station number desired for the device. Station number<br />

3.1.2.4 DECT Registration<br />

On this page, the DECT id and authorization codes are defined. In addition, a pull down menu<br />

selects one of four subscription events, subscribe, (de)subscription, mobility or display registered<br />

stations. A separate password box permits password entry to terminate (erase) all DECT<br />

subscriptions.<br />

3-3

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!