iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (DATA Features)
First, you must insert ‘WAN Ethernet’ to LAN Bridge. Refer to Section 6.4.14 Setting up a
WAN-LAN Bridge. In the ‘Network’ Connections’ screen under ‘System’, click ‘LAN Bridge’ and
‘Bridging’. The ‘LAN Bridge Properties’ screen appears. You must check ‘WAM Ethernet’ to insert
to ‘LAN Bridge’. Click ‘Apply’. The following screen appears.
Figure 6.251 Bridging tab of LAN Bridge Properties
Refer to Section 6.4.17.2 Creating a VLAN Interface. In the ‘Network Connections’ screen
under ‘System’ (see Figure 6.11), click the ‘New Connection’ link. The ‘Connection Wizard’
screen appears (see Figure 6.12). Select the ‘Advanced Connection’ radio button and click
‘Next’. The ‘Advanced Connection’ screen appears. Select the ‘VLAN Interface’ radio button
and click ‘Next’. The ‘VLAN Interface’ screen appears.
Figure 6.252 VLAN Interface setting
Enter a value that will serve as the VLAN ID, and click ‘Next’. The following screen appears.
284