iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (IP-PBX Features)
3.2.3.6 SMDR Attributes
Station Message Detail Recording (SMDR), which is output over TCP channel, contains details on
both incoming and outgoing calls. Various SMDR attributes can be assigned including; output
records for all calls or LD only, call cost per pulse when using call metering, etc. The following
Table describes SMDR Attributes:
Table 3.2.3.6 SMDR Attributes
ATTRIBUTE DESCRIPTION RANGE DEFAULT
Call Metering
Selects the call-metering signal from the PSTN NONE
NONE
to indicate call cost
NPR
Save Enable
The system can output all outgoing call
ON
OFF
records (ON), or to allow for PSTN call set-up
times, only records for calls that exceed the
SMDR Timer (OFF, refer to Start Timer
Attribute).
OFF
Print Enable
The system can output SMDR records
ON
ON
automatically as they occur (real-time) or only
when requested. When this attribute is ON,
SMDR output is automatic at call completion.
OFF
Record Type
The system can record all outgoing calls or Long Distance All Call
only long distance calls. Long distance calls
are identified by the LD digit count and LD
codes assigned in “Long Distance Call Digit
Counter” and “Long Distance Code” below.
All call
Long Distance Call Digit Dialed numbers, which exceed the assigned
07-15 08
Counter
LD digit count are considered long distance
calls for SMDR and COS purposes.
Print Incoming Call
The system can output records for Incoming
ON
OFF
calls as well as outgoing calls. If enabled,
incoming as well as outgoing calls are
recorded.
OFF
Print Lost Call
When incoming call records are enabled, the
ON
ON
system can also provide records for
unanswered incoming (abandoned) calls.
OFF
Records In Detail
The system can output detailed call records
ON
ON
(ON) or summary call information (total
number of calls, cost and cost for each
station).
OFF
Hidden Dialed Digit
For security purposes, digits dialed for an
3~9 3
outgoing call can be hidden and replaced with
“*”. This field defines the number of digits to
hide the trailing digits
SMDR Currency Unit
The unit of currency used for call cost can be Max 3 Characters EUR
identified with 3-characters for easy reference.
SMDR Cost Per Metering
Pulse
When call metering is provided by the PSTN,
the cost per metering pulse can be assigned.
6-digits 000000
3-20