iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (IP-PBX Features)
2.15 DIAGNOSTIC/MAINTENANCE
Description
The system software incorporates various diagnostic and maintenance routines that may be
“called” remotely or locally through the systems RS-232 serial ports, a TCP/IP connection using a
Web browser or telnet terminal established over IP networks. Routines that can be accessed
include trace functions at the device level, commands for diagnostics and maintenance, and tools
for manipulation at the OS level.
Operation
Conditions
Programming
Related Features
Hardware
2.16 DIAL-BY-NAME
Description
A name, up to 16 characters, may be assigned to each Individual and Common Speed Dial. In
addition, each station may be assigned a 12-character name. When assigned, a user may place
an intercom call to another station or select a Station or Common Speed Dial using the name.
The user selects from one of three Dial-by-Name directories and enters characters employing 2
dial pad buttons for each character (refer to Character Entry Chart Table). The system finds and
displays the nearest match to the user entries. The user may continue entering characters or scroll
the directory at any point using the [VOL▲]/[VOL▼] button and select a name to call. The number
associated with a selected name may be displayed by using the [TRANS] button.
Operation
LIP Phone
To use Dial by Name:
1. Press soft key [DIR].
2. Dial the desired directory.
3. Search the directory using the [VOL▲]/[VOL▼] button or by entering the number .
2-22