iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (DATA Features)
the secure Telnet over SSL port is 992. You can change the port number in the ‘System
Settings’ screen, as described in Section 6.2.
2. Install a Telnet SSL client on your PC.
3. Connect to iPECS SBG-1000 via Telnet SSL. For example, if you are using a Linux host,
enter the following command in a shell:
$ telnet-ssl -z ssl 192.168.1.1 992
Unless you have a digital certificate recognized by iPECS SBG-1000, you will be requested
to enter iPECS SBG-1000’s username and password.
Note: If iPECS SBG-1000’s ‘Telnet over SSL Client Authentication’ option is set to
‘Required’ (refer to Section 6.2), it is important that the CN field of the certificate
contain the name of the iPECS SBG-1000 user, which has administrator rights.
Otherwise, iPECS SBG-1000 will deny access to its CLI.
6.8 Performing System Maintenance
6.8.1 About iPECS SBG-1000
The ‘About iPECS SBG-1000’ screen presents various details about iPECS SBG-1000’s software
version, such as version number, type of platform and list of features.
Figure 6.285 About iPECS SBG-1000
308