iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (DATA Features)
4. Select whether to configure an existing bridge (this option will only appear if a bridge exists)
or to add a new one:
a. Configure Existing Bridge Select this option and click ‘Next’. The ‘Network Bridging’
screen appears allowing you to add new connections to the bridge or remove existing
ones, by selecting or deselecting their respective check boxes. For example, to create a
WAN-LAN bridge, select the WAN connection’s check box.
Figure 6.166 Network Bridging – Configure Existing Bridge
b. Add a New Bridge Select this option and click ‘Next’. A different ‘Network Bridging’
screen appears allowing you to add a bridge over the unbridged connections, by
selecting their respective check boxes.
Figure 6.167 Network Bridging – Add a New Bridge
5. Click ‘Next’. The ‘Connection Summary’ screen appears, corresponding to your changes.
Figure 6.168 Connection Summary – Configure Existing Bridge
243