06.03.2015 Views

iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

<strong>iPECS</strong> <strong>SBG</strong>-<strong>1000</strong> <strong>User</strong> <strong>Manual</strong> (IP-PBX Features)<br />

2.12 FAX<br />

Description<br />

Data transmitted over CO lines is subject to distortion and errors if system tones (ex., Camp-On,<br />

Override) are applied during transmission. To eliminate such errors, stations that use analog data<br />

(modems or Fax) can be assigned to block incoming system tones.<br />

Operation<br />

System<br />

System tones are automatically blocked when FAX utilization is set to “ON”.<br />

Conditions<br />

1. Stations or an Attendant attempting to Camp-On or Override a station with FAX utilization will<br />

receive an error tone.<br />

2. When FAX utilization is enabled, the system will not apply audio gain to the call.<br />

Programming<br />

VOICE INSTALL<br />

FAX – FAX Configuration – FAX Utilization<br />

Related Features<br />

Hardware<br />

Call Waiting/Camp-On<br />

2.13 DELAYED CO RING<br />

Description<br />

Ring signals for an incoming CO call can be sent to stations immediately upon detection or after an<br />

assigned ring cycle delay. The delay can be up to 9 system ring cycles, thus allowing other<br />

stations to answer the call.<br />

Operation<br />

System<br />

Delay Ring operation is automatic when assigned:<br />

Conditions<br />

1. Delay Ring can be assigned for a station.<br />

2. If no delay is entered when programming Ring assignments, the station will immediately ring<br />

when a call is received.<br />

3. Private Lines may be assigned with delayed ring.<br />

2-20

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!