iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (DATA Features)
6.8.4 Restoring Factory Settings
Restoring iPECS SBG-1000’s factory settings removes all of the configuration changes made to
iPECS SBG-1000 (including the created user accounts). This is useful, for example, when you
wish to build your home network from the beginning, and wish to go back to the default
configuration.
Click the ‘Restore Factory Settings’ link under the ‘Maintenance’ menu item. The ‘Restore Factory
Settings’ appears.
Figure 6.288 Restore Defaults
Click ‘OK’ to proceed. iPECS SBG-1000 removes all of your personal settings, and then reboots.
6.8.5 Upgrading the Gateway’s Firmware
Click the ‘iPECS SBG-1000 Firmware Upgrade’ link in the links bar. The ‘iPECS SBG-1000
Firmware Upgrade’ screen appears.
Figure 6.289 iPECS SBG-1000 Firmware Upgrade
• iPECS SBG-1000 offers a built-in mechanism for upgrading its software image, without losing
any of your custom configurations and settings.
6.8.5.1 Upgrading From a Computer in the Network
To upgrade iPECS SBG-1000’s software image using a locally available .rms file, perform the
following:
1. In the ‘Upgrade From a Computer in the Network’ section, click the ‘Upgrade Now’ button.
The ‘Upgrade From a Computer in the Network’ screen appears.
310