iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (DATA Features)
Figure 6.141 Connection Summary
9. Select the ‘Edit the Newly Created Connection’ check box if you wish to be routed to the
new connection’s configuration screen after clicking ‘Finish’. This screen is described later
in this chapter.
10. Click ‘Finish’ to save the settings.
The new PPTP connection is added to the network connections list, and is configurable like any
other connection.
6.4.10.2 Creating a PPTP VPN Connection
To create a new PPTP VPN connection, perform the following:
1. Click the ‘New Connection’ link in the ‘Network Connections’ screen (see Figure 6.11). The
‘Connection Wizard’ screen appears (see Figure 6.12).
2. Select the ‘Connect to a Virtual Private Network over the Internet’ radio button and click
‘Next’. The ‘Connect to a Virtual Private Network over the Internet’ screen appears (see
figure ‘Connect to a Virtual Private Network over the Internet’).
3. Select the ‘VPN Client or Point-To-Point’ radio button, and click ‘Next’. The ‘VPN Client or
Point-To-Point’ screen appears.
Figure 6.142 VPN Client or Point-To-Point
230