iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (IP-PBX Features)
The calling station hears a ring-back tone instead of a busy-tone.
To answer the Call Offer
1. Press the flashing CO line button while receiving a muted ring.
Or,
2. The muted ring is changed to normal CO ring when you go on-hook state. Then you can
answer the offered call.
Conditions
1. Call Offer is only applied to a station that is in talk status.
2. During a conference or paging, call offer is not activated.
Programming
VOICE INSTALL
CO Line Registration – Net Basic Attributes
Related Features
Hardware
2.81 STATION CALL COVERAGE
Description
The Call Coverage feature permits a LIP Phone user to receive ring and answer calls directed to a
covered station. This feature is generally employed to allow a Secretarial answering position to
cover calls to other stations. When a covered station rings, the {CALL COVERAGE} button LED will
flash and the covering station may receive ring (immediate or delayed) for the call. The covering
station can answer the call using the {CALL COVERAGE} button, terminating ring at other stations.
Once answered, the LED of {CALL COVERAGE} buttons for the station at other covering stations will
extinguish.
Operation of this feature requires a {CALL COVERAGE} button at the covering LIP Phone and the
covered station must activate call coverage. A station can have multiple Call Coverage buttons
each covering a different station and multiple stations can have a Call Coverage button for a given
station.
Operation
LIP Phone
To assign a {CALL COVERAGE} button at the covering station
[PGM] + {FLEX} + ‘*#’ + covered Station number + [SAVE]
When a covered station receives a call, the covering station will receive the following display:
2-121