iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (IP-PBX Features)
Two way recording
1. You should set IPCR group(ex: 620) and the SIP number of the IPCR as the member of IP
CR Group.
2. Automatic Recording Destination should be set the IPCR Group(ex: 620).
Operation
1. IP-Phone(S100) without agent ID answered from IP-phone(S101) with agent ID(A500).
2. If S101 can conference 3 way, S101 connects IPCR with the agent ID(A500).
3. If you have flex button with two-way record of IPCR Group (620) and agent ID is ACR, it’s
flashed during two way recording. But it’s ODR, first time, it’s not flashed. After pressing
the flex button (two way record), it’s flashed. ACR is unconditionally recorded after
connection and ODR is conditionally by user’s choice.
4. Even though it’s ODR, it can be recorded during talking. If users don’t press the two-way
recording button within talking, it’s erased.
Conditions
1. You can search the recorded using Web Admin of IPCR.
2. IPCR server can be registered up to 10 servers in a system.
Programming
VOICE CONFIG
Station Group Data – IPCR Agent
Station Group Data – Station Group Assignment
Station Data – Common Attributes - Automatic Talk Recording Dest
Related features
Hardware
2.83 AUTHORIZATION CODES (PASSWORD)
Description
Authorization Codes provide a means to control access to Off Premise Call Forward or DISA and
may be required for outgoing CO Line access based on configuration of the iPECS SBG-1000
database. When users dial an Authorization Code that matches an Authorization Code stored in
the database, the system invokes the Station COS or the COS assigned to Authorization code.
Each Authorization code has separate Day/Night mode COS assignments.
There are two types of Authorization Codes, Station and System. A Station Authorization Code is
specifically related to a given station and intended for a single user. The System Authorization
Codes are intended for use by any station in the system.
The Station Authorization Codes includes the associated station number and the assigned code.
The structure of the System Authorization code can be set as either ”*”, or “*” the Authorization
2-123