iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (DATA Features)
Figure 3.2 Internet Connection – Settings
If you are already connected to the Internet, this screen provides information on your connection.
The drop-down menu provides the WAN connection types supported by iPECS SBG-1000, and
your WAN connection can be configured using one of the following methods.
• Manual IP Address Ethernet Connection
• Automatic IP Address Ethernet Connection
• Point-to-Point Tunneling Protocol (PPTP)
• Layer 2 Tunneling Protocol (L2TP)
• Point-to-point protocol over Ethernet (PPPoE)
• No Internet connection
3.2.1 Manual IP Address Ethernet Connection
Select ‘Manual IP Address Ethernet Connection’ from the ‘Connection Type’ drop-down menu.
Figure 3.3 Internet Connection – Manual IP Address Ethernet Connection
According to your service provider’s instructions, specify the following parameters:
• IP address
24