iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (IP-PBX Features)
2.59 SAVE NUMBER REDIAL (SNR)
Description
The last dialed number on a CO call may be stored (up to 23 digits) in a buffer for future use. This
number is saved in memory until the user requests a new number be stored. Numbers dialed for
subsequent calls do not affect the Save Number buffer.
Operation
LIP Phone
To save a dialed number, while on a CO call:
1. After dialing (before hanging up), press the right navigation button.
2. Press the soft [SAVE] button.
To dial a saved number:
1. Lift the handset or press the [SPEAKER] button.
2. Press the soft [DIR] button.
3. Press the soft [SPEED] button.
4. Press ‘#’.
Conditions
1. The saved number can be a maximum of 23 digits.
2. Dialing the saved number will automatically seize the CO line that was used for the original
call. If the CO line is busy, a CO line from the same group will be selected and the saved
number dialed. If all CO lines from the group are busy, the user will receive All Lines busy
tone and may queue.
3. If there is no {CO} button, the call will be presented on a {LOOP} button.
4. Save Number Redial is protected from power failure.
Programming
Related Features
Individual Speed Dial
Common Speed Dial
LNR (Last Number Redial)
Hardware
LIP Phone
2-91